MATERIAL
SAFETY DATA SHEET
PRODUCT
IDENTIFICATION AND USE
Product:
Corona Smoke Fluid 300C
Product code:
300C
Product use:
Generators producing an artificial fog (Spirit
300C)
Supplier:
Corona Integrated Technologies Inc., 6215 Overstone Drive,
West Vancouver, B.C., Canada. V7W 1X7 Telephone: 1-888-878-9433
Emergency telephone number: 1-888-878-9433
**No
significant immediate hazards for emergency response are known
INGREDIENTS
Main Ingredient: Dipropylene glycol (CAS# # 025265-71-8) PHYSICAL DATA* Physical State: Liquid Appearance: Colorless Odor: Practically odorless Vapor Pressure: 0.03 mm Hg @ 25ºC Boiling Point: 446ºF, 230ºC @ 760.00mm Hg Melting Point: Supercools Specific Gravity: 1.0252 at 25ºC FIRE AND EXPLOSION DATA* Flash Point: 121ºC (open cup)
REACTIVITY DATA*
Chemical stability: Normally stable
Incompatibility with other materials: Oxidizing material
Hazardous decomposition products: When heated to decomposition it emits acrid smoke and irritating vapors
TOXICOLOGICAL PROPERTIES*
PREVENTATIVE MEASURES
Eye/face protection: Use safety glasses.
Skin protection: No precautions other than clean body-covering clothing should be needed.
Respiratory protection: Atmospheric levels should be maintained below the exposure guideline. For most conditions, no respiratory protection should be needed.
Disposal: All disposal methods must be in compliance with all Federal, State/Provincial and local laws and regulations. Regulations may vary in different locations.
Fire extinguishing media: Water fog or fine spray, carbon dioxide, dry chemical, foam.
FIRST AID
Eyes: Flush eyes with plenty of water
Skin: Wash off in flowing water or shower
Ingestion: If swallowed, seek medical attention. Do not induce vomiting unless directed to do so by medical personnel
Inhalation: Remove to fresh air if effects occur. Consult a physician.
NFPA HAZARD CLASSIFICATION
Health: 0 Materials that, on exposure under fire conditions, offer no hazard beyond that of ordinary combustible material.
Flammability: 1 This degree includes materials that must be preheated before ignition will occur.
Reactivity: 0 This degree includes materials that are normally stable, even under fire exposure conditions, and that do not react with water. Normal fire fighting procedures may be used.
U.S.
REGULATIONS
TSCA: All ingredients are on the TSCA inventory, or are not required to be listed on the TSCA inventory.
Clean Air Act: This material does not contain any hazardous air pollutants. This material does not contain any Class 1 Ozone depletors. This material does not contain any Class 2 Ozone depletors.
Clean Water Act: None of the chemicals in this product are listed as Hazardous Substances under the CWA. None of the chemicals in this product are listed as Priority Pollutants under the CWA. None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA: None of the chemicals in this product are considered highly hazardous by OSHA
TRANSPORT INFORMATION
Canadian Transportation of Dangerous Goods: Not specifically listed in the dangerous goods regulations
U.S. Department of Transport: Not specifically listed in the hazardous materials shipping regulations
Corona Integrated Technologies Inc. has no control over the management practices or manufacturing processes of parties handling or using this material. The information presented here pertains only to the product as shipped in its intended condition as described herein.
Effective Date: 10/06/2008
Updated
on