MATERIAL SAFETY DATA SHEET

PRODUCT IDENTIFICATION AND USE

Product: Corona Thermal Fog 180

Product code: 180

Product use: Generators producing a thermal aerosol (ViCount series, Sprinkler testing smoke system)

Supplier: Corona Integrated Technologies Inc., 6215 Overstone Drive,

West Vancouver, B.C., Canada. Telephone: 1-888-878-9433

Emergency telephone number: 1-888-878-9433

No hazards for emergency response are known.

COMPOSITION INFORMATION

Ingredients: Contains White Mineral Oil USP

PHYSICAL DATA

Physical State: Clear liquid

FIRE AND EXPLOSION DATA

Flash point: 439oF, 226oC

Method used: ASTM - Cleveland Open Cup

 

REACTIVITY DATA

Chemical stability: Stable

Incompatibility with other materials: Oxidizing material

TOXICOLOGICAL PROPERTIES

Eye: No prolonged or significant eye irritation.

Skin: No significant skin irritation. If absorbed through the skin, practically non-toxic to internal organs.

Oral: Non-toxic to internal organs.

PREVENTATIVE MEASURES

Eye/face protection: No special eye protection is usually necessary.

Skin protection: No precautions other than clean body-covering clothing should be needed.

Respiratory protection: For most conditions, no respiratory protection should be needed.

Disposal: All disposal methods must be in compliance with all Federal, State/Provincial and local laws and regulations.
Regulations may vary in different locations.

Fire extinguishing media: CO2, Dry chemical powder, Foam and Water Fog.

 

FIRST AID

Eyes: No first aid procedures are required. Flush eyes with plenty of water if eyes are irritated.

Skin: No first aid procedures are required. Wash off with soap and water if skin appears to be effected.

Ingestion: If swallowed, give water or milk to drink and seek medical attention. Do not induce vomiting unless directed to do so by medical personnel.

Inhalation: If effects occur remove to fresh air. Consult a physician.

 

U.S. REGULATIONS

Toxic substances control act: All components are on the TSCA inventory

Federal DOT: Not designated as a hazardous material

CANADIAN REGULATIONS

Canadian Workplace Hazardous Material Information System: This is not a “Controlled Product”

Corona Integrated Technologies Inc. has no control over the management practices or manufacturing processes of parties handling or using this material. The information presented here pertains only to the product as shipped in its intended condition as described herein.

Effective Date: 01/15/2003                                    Updated on

The information herein is given in good faith, but no warranty, express or implied, is made.

Prepared by Corona Integrated Technologies Inc.