MATERIAL SAFETY DATA SHEET

PRODUCT IDENTIFICATION AND USE

Product: Corona Thermal Fog Fluid U3 (Part Nos.: FSO, FAG)

Product code: 13

Product use: Generators producing a thermal aerosol (Vi-Count series, Artem)

Manufacturer: Concept Engineering Limited, 7 Woodlands Business Park,
Maidenhead, Berks. SL6 3UA, England. Telephone: 44-1628 826261

Supplier: Corona Integrated Technologies Inc., 6215 Overstone Drive,
West Vancouver, B.C., Canada. Telephone: 1-888-878-9433

Emergency telephone number: 1-888-878-9433

 

No significant immediate hazards for emergency response are known.

HAZARDOUS INGREDIENTS

Ingredients: Contains Shell Ondina Oil

PHYSICAL DATA

Physical State: Liquid at ambient temperature

Odor/Appearance: Clear, colorless

Vapor pressure: 0.5 Pa @ 20oC

Vapor density: 1

Boiling Point: 280oC

 

FIRE AND EXPLOSION DATA

Flash point: 390oF, 200oC

Method used: PMCC

Upper flammable limit: 10% v/v

Lower flammable limit: 1% v/v

Auto ignition temperature: 320oC

 

REACTIVITY DATA

Chemical stability: Stable

Incompatibility with other materials: Oxidizing material

Hazardous decomposition products: None under normal storage circumstances

TOXICOLOGICAL PROPERTIES

Skin: The LD50 for skin absorption is 2,000 mg/kg

Oral: The oral LD5O for rats is 2,000 mg/kg

Inhalation: Not a hazard under normal conditions of use

Carcinogenicity: Non carcinogenic in animal skin-painting studies

Mutagenicity: Not considered a hazard

PREVENTATIVE MEASURES

Eye/face protection: Use safety glasses.

Skin protection: No precautions other than clean body-covering clothing should be needed.

Respiratory protection: Atmospheric levels should be maintained below the exposure guideline. For most conditions, no respiratory protection should be needed.

Disposal: All disposal methods must be in compliance with all Federal, State/Provincial and local laws and regulations. Regulations may vary in different locations.

Storage: Storage temperature not to be less than 0oC or to exceed 50oC

Fire extinguishing media: Dry chemical powder and foam. Do not use direct water stream or Halon extinguishers

 

FIRST AID

Eyes: Flush eyes with plenty of water

Skin: Wash off with soap in flowing water or shower

Ingestion: If swallowed, seek medical attention. Do not induce vomiting unless directed to do so by medical personnel

Inhalation: Remove to fresh air if effects occur. Consult a physician.

U.S. REGULATIONS

Toxic substances control act: All components are on the TSCA inventory

Corona Integrated Technologies Inc. has no control over the management practices or manufacturing processes of parties handling or using this material. The information presented here pertains only to the product as shipped in its intended condition as described herein.

Effective Date: 01/15/2003                          Updated on

The information herein is given in good faith, but no warranty, express or implied, is made.

Prepared by Corona Integrated Technologies Inc.

Verified by Concept Engineering Ltd. 01/15/2003